ProtoxHysan

VENTILATION
Luma Ventilation

Filtre og tilbehør til Luma ventilation

Siku Ventilation

Filtre og tilbehør til Siku ventilation

Duka Ventilation

Filtre og tilbehør til Duka ventilation

Ventoxx Hamoni

Filtre og tilbehør til Ventoxx Hamoni
INDEKLIMA & BYGGEMATERIALER
Multipor

Hydraulic kalkmortar

Radon

Maling

Måleudstyr

Kemi

SkamoWall

Prøv vores beregner til Multipor og SkamoWall
VARMEPUMPER
SKIMMELSVAMP TESTE
MONTAGE
GUIDES
Ventilation

Kælder

Varmepumper

Isoleringsplader

Radon

Skimmelsvamp
KONSULENTBESØG
REFERENCER
KONTAKT OS

ER DU I TVIVL OM DEN RETTE LØSNING? FÅ PROFESSIONEL RÅDGIVNING HER!

0 kurv

369,00 kr. – 1.599,00 kr.

Size

Ryd

SKU: N/A Categories: Kemi

Produktbeskrivelse

ProtoxHysan is a special agent for cleaning and disinfecting mold.

The product can also be used to remove odors and disinfect after bacteria, yeast and mold attacks.

Cleans and disinfects mold infestations
Removes bad odors
Disinfects after bacterial growth
The product is documented to be indoor climate neutral.
Applied like traditional cleaning agents
Can be used by EVERYONE – both professionals and private individuals

The benefits of ProtoxHysan

With ProtoxHysan you get a product with many functions and options. The product is especially good for removing mold, removing odors and disinfecting. The product is used like other cleaning agents and can be combined with mechanical cleaning with a stiff brush.

One of the biggest advantages of ProtoxHysan is that the product breaks down mold and bacteria right down to the cell wall. This means that all mold is removed – both living and dead.

Another major advantage is that ProtoxHysan does not pollute the indoor climate (see ProtoxHysan’s indoor climate report). The chlorine dioxide breaks down into oxygen and salt.

A third advantage of ProtoxHysan is that the agent both removes odors and disinfects after, for example, cloudbursts, rising sewage water and dead animals and people. ProtoxHysan also disinfects bacteria. It is therefore a preferred product when it comes to cleaning and sanitation in these situations.

ProtoxHysan is tested and registered

ProtoxHysan is included/registered in the database for building products that can be used in Nordic Ecolabelled buildings.

The product has been tested according to EN standards EN 1650, EN 1276 and EN 13697. And according to an indoor climate report made by Eurofins A/S, the product does not burden the indoor climate after use. There is therefore no limitation on the size of the treated area.

Active ingredient: In situ formation of Chlorine Dioxide by acidification of Sodium Chlorite.

Use of ProtoxHysan

What is ProtoxHysan?

ProtoxHysan is a specially developed product against mould, odor problems and for disinfecting bacterial growth. The product may be used by private and professional consumers for everything from window sills to major renovation tasks. ProtoxHysan can therefore be used in several different ways and for different purposes depending on the task and scope.

ProtoxHysan has a faint chlorine-like odor. The product does not contain perfume or other fragrances and therefore does not pollute the indoor climate after treatment.

Use of activated Hysan requires Protox Mold Remediation Course

Where do you use ProtoxHysan?

Can be used on surfaces affected by mould, odor problems or bacterial growth

The product may corrode (damage) some metals and bleach certain colored and colored surfaces/materials.

When do you use ProtoxHysan or ProtoxBiox?

ProtoxHysan and ProtoxBiox are both used to clean mold and bacteria, but the products are used in different ways and on different surfaces. That’s why we’ve created a user manual that shows you when and how to use the two products.

The purpose of the user manual is to achieve better quality control of the solution of the tasks. Therefore, we have also included various methods for how both internal and external control can be carried out in the user manual.

The user manual is in PDF format. You can therefore print it out, laminate it and take it with you on assignments so that you always know how to proceed with the individual assignment.

Download ProtoxHysan instructions for use

Preparation

ProtoxHysan comes in both ready-to-use and concentrate form. The ready-to-use spray bottle must not be diluted further. The concentrate can be diluted as needed based on the following:

Particularly stubborn discoloration: Concentrated ProtoxHysan

Severe attacks: 1 part ProtoxHysan + 1 part water

Medium-severe infestations: 1 part ProtoxHysan + 2 parts water

Light attacks: 1 part ProtoxHysan + 3 parts water

Consumption is approximately 0.5 liters of solution per m2, ^depending on the absorbency of the substrate.

The product should not be stirred before use.

ProtoxHysan must not be exposed to temperatures above 50°C or added to acid, as this can cause chlorine dioxide to form (see data sheet).

Ensure good ventilation during the treatment and during the drying period.

Always read the instructions for use and the safety data sheet before using the product.

When you want to remove mold

It is important to remove the cause of the mold infestation. If the cause is not removed, the mold will most likely return. In some cases, it is not possible to remove the cause. In this case, you can instead prevent new mold infestations with ProtoxSkimmel.

Mold control for small and private projects

Remove the infested material if possible.
Vacuum the surface with a vacuum cleaner with a HEPA filter.
Spray ProtoxHysan on and scrub with a semi-stiff brush.
Rinse with ProtoxHysan and leave for 24 hours.

Mold control for larger projects

Remove as much of the affected material as possible (eg wallpaper and/or plaster)
Vacuum the surface thoroughly with a vacuum cleaner with a pollen filter (microfilter).
Mix ProtoxHysan and water in a flower or garden sprayer.
Spray the ProtoxHysan solution onto the mold-affected surface
Scrub the surface thoroughly with a nylon brush or power scrubber until the mold is loosened from the surface.
Rinse the surface clean with the solution to remove as much mold residue, particles and dirt from the surface as possible.
Leave the „wet‟ Hysan-treated surface for up to 24 hours so that the agent can continue to act on the surface, thereby oxidizing residual odors.

After 1 day of application, the surface can be wiped with a damp cloth. This is usually not necessary if you follow the instructions for use.

Respiratory protection for larger tasks

If you are removing mold on a larger area (more than a few A4 pages) and especially if you are removing mold-affected materials (eg wallpaper, plaster, render or insulation), there is a risk that dust and mold spores may be released into the air. We therefore recommend that you use a respirator of type P3 or better. A typical combination respirator of type B2/P3 protects you against inhaling particles from the mold and against inhaling aerosols when spraying ProtoxHysan.

Download ProtoxHysan instructions for use

Odor removal with ProtoxHysan

You can also remove bad odors with ProtoxHysan. The odor may be caused by mold growth, bacterial growth, dead animals, corpses and other things.

The odor is removed by soaking or washing the affected surfaces with ProtoxHysan or by mist spraying with the product. Mist spraying is especially effective in difficult-to-reach areas.

The treatment can also be combined with the ProtoxAbScent bag, which is hung up to remove residual odor.

After treatment

Drying time is 4-8 hours at 20°C.

Tools and equipment are cleaned with soap and water after use.

The product must be stored in a dark and cool place and must not be stored together with food.

ProtoxHysan has a shelf life of 12 months in unopened packaging.

Empty packaging can be thrown away with the household waste.

Quality control

If you want to check yourself whether the mold has been removed, you can do so with a ProClean test. The ProClean test is a standard protein test that shows whether the mold proteins have been removed. You can perform the test as early as 10-15 minutes after using ProtoxHysan. Read more about ProClean here.